Fits like poured off and have it up without having problems. Before you start, I was recommend the display to the smallest corner to get fat / dust. (Window Spray) Most importantly, you should move like a Camelion, so best put 10 minutes back and the dust in the room give back abzusetzten. And really take the film in slow motion from the table and once even a dust fiber has compromised glass wipe in slow motion with a lint-free cloth, again, must be absolutely free. I started at the camera side, and then more and more withdrawn, the slide down (piece by piece) back and above the same taken a debit card as smooth strings that are already visible during application no air bubbles. Most important thing is really the absence of dust, if you have a filament under the film, it gets an ugly bubble !!! (Can you strip with a tesafilm remove)