Philips LED lamp replaces 60 Watt E27 2700 Kelvin - Warm White 10Watt 806 lumen dimmable

Categories


  • Sometimes flickers in the dimmed state  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    We have also already various LED Spots Philips in continuous use. The color of the light was much appreciated. That's why it should now again a Philips LED lamp be. The light output and light color was as expected. What the illuminant is the Dimmerba
  • LED lamp with weaknesses when dimming  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    I run three of these bulbs in my living room lamp to a suitable for LED lamps dimmer (flush dimmer for energy saving lamps T39.07). In full Leuchtshtärke the Philips bulb is completely satisfactory. However, it tends greatly dimmed the area to light
  • Unfortunately loud humming when dimming  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    Went back because every 3 purchased lamps have hummed during dimming. Unlike the Hofer now used (Aldi Süd) lamps.
  • Very good quality, long delivery time  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    After an unfortunately very long delivery time (14 days) the good piece finally arrived. The quality is absolutely superb. The lamp will start immediately without delay and is continuously dimmable without flicker! She has a pleasant warm white light
  • for mains isolation  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    Lamp also works on a demand switch. That was my main criterion. A normal non-dimmable not, regardless of manufacturer. The dimmable from sebson also did not go. Light is ok, nothing buzzing or flickering before. About life, I can not say anything
  • Unfortunately, the lamp LED flickers in conjunction with ITLR-300 wireless switch  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    ... As soon as they dim. This is a shame, because it is thought just that. For us it is therefore unfortunately completely useless. Of the Brummgeräuchen partially described here, we found nothing. We have used them in conjunction with a InterTechno
  • Unfortunately, the lamp is buzzing with us a bit noisy  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    We have bought the lamp to replace a light bulb above the dining room table. It is controlled via a built-in dimmer-Jung. Unfortunately, she hums quite noisy even at full power. With reduced power which is humming even louder. The light I find quite
  • Not really ... dimmable light not cozy.  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    Bulb is about as bright as a 44 watt halogen flood bulb at maximum dimming. This is not really as can be "dimmed" call, then she goes out abruptly. At full power, it is very light, but the light is not very cozy, very strange, especially in
  • Tip Top, ruckzuck bright  

    Philips LED lamp replaces 60 Watt E27 2700 Kelvin - warm white, 10 Watt, 806 lumen, dimmable (household goods)
    In contrast to conventional energy-saving lamps this LED is already at power felt at 80% of total output, it is not so dark when you turn on the contrary.