Test: KRS-Smart Gripper Cars Smartphone Holder

The Smartphone Holder KRS-Smart Gripper Cars Auto Smartphone holder would put me out of testberichte.reviews free of charge. Thanks a lot for this.
The support came well packaged with me.
The holder is very solid and is made of solid black plastic.
Function: An instruction manual is not in, but a picture is on the side of the holder is glued, which explains the function of the suction cup. Attaching the holder is quite easy, even if in the first experiments quite a lot of force is needed to flip the lever. The suction cup has good support on windows and smooth surfaces.
How to set the bracket for the smartphone to the required size is not further described, but this is also self-explanatory (there are two push buttons on the back of the plate). If the distance was again set appropriately for the smartphone, this setting must not be changed. The upper of the three support arms has a spring mechanism and can be easily pulled up to take the smartphone out of the holder. The holding plate for the smartphone is mounted on a ball joint on the bracket and can be fixed through a screw.
The three bracket arms can be adjusted to a width of 64mm to 92mm, which corresponds to most of the major smartphones nowadays. An iPhone 4S is already too small for the holder. Here so please check in advance the dimensions of your smartphone again!
Once anchored in the holder has the right smartphone good support depending on the model (in my testing with Moto G) it can come through the holding arms to problems with the buttons on the side of the device. Unfortunately, this is the problem with universal brackets you can never please everyone.
Here, in the case of the Motorola Moto G's smartphone it is not possible to centrally set in the holder, otherwise always the on / off switch or a volume button is pressed (see photo). Mounted holds the smartphone but still in the holder.
I am very pleased with the support from me there for a strong buy recommendation.