It is fixed slightly thicker and durable film with relatively scratch resistant surface. I had ordered in matt and am very happy with the anti-reflective effect. The tab 4 has a glossy surface, use a: office (lamps in the ceiling) was almost impossible if you put the tablet flat out. The problem has been fixed with this film. The matt surface is no longer sees the finger so on display. However, the photos look even more so razor sharp. To reduce somewhat the resulting blur, it was necessary to adjust the display brighter (increased energy demand - but hardly noticeable in practice). I use the Tablet and often it was also important to me, to the customer to be able to show photos, without having to perform every time an elaborate cleaning. 1 point deduction: On the packaging of the film sets is described that one should start at the top of the display-top with the attachment that has as far as fit exactly with the centering hole for the front camera. Only the bottom punched hole was too high for the key around 1mm, but the size very accurately. That had to mean that the film rests on the button and is not fixed on the display, which is marked as a bright bubble. With much effort I had the sheet below pull back and carve the hole with the cutter larger. So you should start when attaching the bottom of the button! Once at the top the camera hole punch does not quite fit, I would have less disturbed. Otherwise, the format has well fitted.
