The XPredator has pretty well fulfilled this task.
It is considered chic for gamers (even my girlfriend found it chic) and the control panel above the force. There are a few things to say: The only USB3 port (? Why are not really all four USB3 ports) has a significantly longer cable, which you look at it by pulling through the housing and can poke from the outside in a USB3 expansion, If you do not have onboard USB3. The two light beams left and right according to the flash disk accesses. I do not mind, but one or the other might.
The processing of the housing is extremely solid. The plate on which the motherboard is mounted, is also very well thought out, as there are outlets for rubberized cable back everywhere. Ever is pretty much knew each rubberized, making the case extremely quiet.
- In some pictures can be seen on the window-side sheet four orange Lüter. This SIDN not there.
+ Good Schraubensotiment
- Not presorted. Took me half an hour cost to sort this and find out which Goes Where
- One never knows exactly on which speed you have asked the infected on the front panel fan as there is no scale
+ Every corner and edge is rubberized to keep the noise as low as possible
+ Generally very quiet.
+ All drive suspensions SIDN rubberized
+ The ventilation is very good, and the air flow is felt also very good
+ It has plenty of space in the interior incredibly
+ Every motherboard fits in there
+ And any long graphics card (that's an assumption ;-))
And now the big point, why I can not recommend anyone housing:
The housing is designed so that you laid all the cables behind the motherboard plate. Especially because you have to install all the hard disks sideways. Exactly what I wanted, so all is well cleared. Unfortunately, on both sides not really enough space for the plug. I have all now crammed more or less well, but some cost on fumbling and fear, so me nothing gets broken.
So great is the case otherwise, I really recommend it for this matter to anyone.