It seemed logical to buy a holder which can be moved in 2 dimensions, as I suspected one hand, the cable must be plugged in to every now and then on the other hand the TV should be mounted above eye level.
The heavy package arrived well packaged and was hoping for a massive and stabiele construction. This impression remained the same even after opening.
The included manual is spartan and rather for people who do not like reading. The function of the individual screws and spacers is more likely to imagine than the manual refer to.
Our walls are delicate and fragile, so could not be used the enclosed dowels, but were replaced by special dowels from a specialist shop which are suitable for our walls. Elsewhere in the house these anchors keep forces of about 150kg stand.
The holder was quickly aligned using the built dragonfly, checked with a calibrated and dowelled to the wall. The television provided with the holders, hooked into the holder and secured against release.
... Then came the disillusionment ...
The support was in after the TV and read to the right (in the opposite side of the folding mechanism) tilt away. The pivot mechanism relented even at the low weight of the TV. Despite multiple readjustment and tighten all screws, even those in the Schwenkmechnik, it was not possible to adjust the TV so that was a swing with no give in the mechanics possible.
Ultimately, I have directed the television one last time, and now I just do not get him.
Too bad, because the principle seemed advisable that Auführung it is not, unfortunately.
The support was given by me 1 point because it is really massive and another for which is the processing of paint, enclosed screws well.
The unusable swivel function, the instability in the joints led to the significant devaluation and the instructions we prefer to remain silent.
All in all, a good approach, but unfortunately the implementation has not succeeded.