Very durable construction and thoughtful wall mount

First, the most important for potential buyers:
For installation is required (in addition to technical skills):
Drill, 13 mm spanner (better nut and ratchet wrench), hacksaw to shorten the enclosed screws, hex wrench, Phillips screwdriver, and optional Hammer, ruler, pliers and a pencil to mark the drill holes.

Attached are a mini-bubble level, 6x 12er dowels (for mounting in masonry) and suitable screws, and various screws to mount the TV. These must be reduced for the most part still.

Now for wall mount:
It is stable, well finished, easy for reasonably technically talented to be mounted and adjusted horizontally after installation, and approximately 15 ° vertical tilt. I have a 42 "TV mounted, the holder bears the weight very well.

Another tip: Since the weight can tilt the tv slightly forward (which is normal), just 2 of 4 enclosed
Spacer down between the TV and the wall bracket. Thus, a "tip forward" balanced and can be optimally balanced over the vertical incline capacity.

My recommendation to buy because the price / performance ratio is very good!