The removal rate is compared to other (cheaper) orbital sanders that I had tried so far, very good, I want to particularly mention at this point that it is possible to control the speed - it is very useful because you do not always need the full removal rate and the machine is even quieter in lower gears and can be naturally more precise.
From the handling ago, the device is far superior in my opinion the one-handed orbital sanders. By being able to lead the unit firmly with both hands is a longer work at higher performances without great fatigue possible (of course remains loops with this device is not necessarily the most pleasant work). Cautiously should be only with the plastic handle front: If you do not attract strong enough the screw, then it can happen that this loosens during operation and slips off the handle with your hand before.
The supplied dust catcher is nothing more than a dust catcher - as good or bad as any other dust collector that I know. Unbeatable but power is when an ordinary vacuum cleaner will be shut - with a reasonable vacuum cleaner was a wonderful work possible (away from the noise of the eccentric _und_ vacuum cleaner at the same time). No noticeable grinding dust in the air and not had to sweep up afterwards too. A completely different feeling than to stand in the swarf and to hope that the dust mask prevents as much as possible and later determine that quite a bit has come to the nose. It is very positive that you need for this device a vacuum cleaner adapter, but the Standardauslass can be connected directly to a vacuum cleaner.
The case lying and advertised Platzierhilfe for sanding sheets I felt as a little joke - if you abrade paint and must accordingly frequently change the abrasive pads you will hardly so much emphasis put on the 100% precise alignment of the pads and rather rapidly turned by hand and abkletten - about 90% accurate. Otherwise, the device comes with a 80 pad and a fairly detailed manual - nothing particularly noteworthy. The case is pleasantly spacious, so that you can also transport also quite a wider choice of pads in the trunk.
When before has to work much overhead, but you should be aware that very high machine weight - 1.9kg overhead can be very tiring and the whole design ago device for over-head use is mE not aligned over time. Fortunately, the over-head use has been very limited for me.
Finally, a warning: The current under "Frequently Bought Together" Displaying "Bosch 2600306007 Adapter F. anther PE x 15AE" does not fit this device! To this unit, it is provided as standard to connect a vacuum cleaner and the adapter accordingly superfluous.
