- After turning on the device shows the current humidity to digital.
- There are continuous or automatic mode.
- You can set the target humidity in 5% increments. After their reaching the unit turns in automatic mode from (not only the compressor but also the fan) and jumps again only when the humidity rises.
- The device is capable of timer (not available in the operating instructions).
- If the water tank is full, the device switches itself off. Due to the power level of the device to the 2.5 liter tank for continuous operation is relatively quick full, alternatively you can also connect a drain hose.
- For the fan there are two speeds. The noise level is acceptable.
- The device has smooth gliding wheels and a folding handle.
- The large air intake area on the front panel has a flap, behind which one can place the filter material when needed (for example in accordance with tailored flat filter for cooker hoods). This has the advantage that not so much dust is blown through the room (is not in the operating instructions).
- The fixed power cord, you can accommodate on an integrated suspension.
From the nature of things a compressor generates vibrations. This can mitigate it by the unit on a insulating substrate is (Styrofoam plate, sleeping pad).
The plastic parts of the unit (water tank, fan flap) can fall into resonance, but what can be prevented by appropriate measures. After repeated use, the resonances have been also.
The device was used in the summer in a 25 square meter room where there within a short time (2 hours) has lowered the humidity to 20%. It also comes in a windowless bathroom after taking a shower to use. That's after 30 minutes as good as dry.
In my copy of the cooling fins were slightly bent at the bottom, but loud "manufacturer" has no effect on the function and still brought me a discount. Communication with the German "manufacturer" worked via email with no problems.
Overall a worthwhile purchase (Note: The device does not only here; -) ...).