Works perfectly with small design flaws

Home + Y = SPP mode
Home + B = Icade Fashion
Home + A = Keyboard Mode
Home + X = GamePad Fashion

If you want to use a different mode of coupling, this one should only
Remove from the known BT devices, otherwise it can not find the IPEGA.

Qualitatively L3 + R3 + Analog Top, the Y, B, A and X buttons hooks not as its predecessor.

L1 + R1 are a bit too close to the clamped smartphone,
thus the fingers are always at the back.

L2 + R2 have a sharp edge which is not for the
are continuous use suitable, as this is inconvenient.

The D-pad is too small for me in the long run, but it works well so far.

The multimedia keys are now properly recognized by smartphone
and can adjust the sound without cumbersome in the device.

Select + Start have no noticeable pressure point because they are too soft.

My touch can be very readily attach and fixedly mounted without wobbling.

The fit of iPEGA's is satisfactory, but does not
to an Xbox or PS3 controller off.

Conclusion: For 20 euros a controller of Acceptable, but could be better.

Now even know what the software:

Of course you can use the controller without any problems with games that run natively
support included, as well as emulators where the entry free
is programmed.

Who wants to play games beyond developed for Android,
the need to search a bit to find appropriate translations.

This is only possible with IME + root privileges on the Smartphone !!!

The Tincore keymapper: (Root required)
[...]

Used free of charge with intrusive clues to buy this software.

You should definitely try this before ausgibig because currently has in
my grade 3 this software a few little quirks.

The programming is very complicated depending on Smartphone / Tablet,
since the mask itself plays to repeatedly in the image.

The functions which may offer it at first confusing
be. Only once you have tried this, you can acceptable to all games
Input masks build that can be put on the buttons of iPEGA.

Even games that are free to navigate with a finger can be programmed
with fields that can be put on the analog sticks or D-Pad.

It is important to connect the controller only, start the game, then start Tincore and confen.

The alternative heist Game Controller 2 Touch: (Root required)
[...]

The software is very easy to use, but does not have the scope of Tincore,
as only pre-entry fields can be stored.

Finished profiles can be exchanged via the website:
[...]

If you create a profile, you make from best in the game a screenshot
with you later see where the points are to set up the buttons.

In GC2T you've targeted, the buttons perform a function which the
should, then you can program the mask.

If the editor invites you open the screen shot, then you draw the fields of
Key in the desired size on the features of the Android game.

The default is selected as Xbox or PS controller as icons.

After you finished, you save the profile, you want to use a profile,
you have to select it before the IME is enabled.

Select Controller connect profile accept> IME as an input device> IME select as active

Another software is currently not known to me, but only by
Tincore or GC2T can be used for fully satisfying the Controller
many Android games.

The software from Moga and Gametel are unfortunately currently incompatible with the iPEGA on the grade 3 in 4.4.4.