I've even let inspire by the other reviews (thanks for that) and then I come also to this terrific product. Many's the space-guzzling microphone stand on the ground on a permanent sorry (I already after one month) and since this arm comes into play. The blast is especially the holder with the clamping screw, in which the arm is put into it. The holder is o at the desk. Ä. clamped and stops after being tightened bombproof. Since my desk is on the left and right and rear unfortunately offered no way to mount from there (desk located on the wall), I was forced to put forward the bracket to the side of the table where I am sitting. And I'm surprised how well the use of works by the swivel function. Had only concerns that have dissolved fortunately in air. Also very particularly the metal springs that ensure that even remain are serious Mikros effortlessly into position. You have a bit of pressure and power to invest if you optimally adjusts the frame, but the stability is the purpose and meaning of the thing already. I use a T.Bone SC450 in the USB version and am not dependent on the XLR cable. The upper part thereof plus micro connector I clean set and connected, so it does not bother about the upper joint. Maybe I'm coming back someday to an XLR microphone. Incidentally, the XLR cable is clean installed as part of the joint. If it bothers someone to get around not drum, cut it off and remove, unless you are sure to use it never. The thread at the upper end for z. B. a Micro Spider has a diameter of 16mm (5/8). For everything else, you will have to resort to an adapter thread. The locking screws at the end of the upper hinge and the bracket offer below option of restricting the pan and tilt functions.
Scope of supply: Swivel arm Bracket with clamping function Integrated XLR cable Instructions
A clear recommendation: Hammer Price and clean quality (space-saving and stable) from the house of Just Music.