Could never inspire SAT and have the locally receivable DVB-T used. But because I have a new HD LED TV I also wanted to have HD +. Cable did not go with me, so there was only SAT. I live directly under the roof. The 60cm bowl falls to the Dormer because of color and size is not so much. Unpacking, antenna dish and the Masthalterset mount, to the components assembly instructions attached, screw together, bracket (not present in the set) screw at the bay, rotate dish and LNB in accordance with instructions for the desired satellite and turn, align bowl coarsely. Please make sure that there are no obstructions such as trees, bushes, houses parts, pipes, etc. between the satellite and the antenna. This can significantly interfere with the reception, or even impossible. Next, make the elevation angle (tilt angle) of the antenna on the mast bracket clamp a (notches availability and in the manual which is described).
Tip: I have loaded me on the AppStore iPhone tool "SatFinder". This allows you to align the dish quickly and easily following the instructions for many satellites.
Then the cable between LNB and Fensterdurchführung and connect to the receiver. I receive ASTRA at 19.2 ° East. Have the bowl in mm-steps up on the TV screen will appear rotated. According Receiver Instructions aligned the antenna finished and 80% the bowl until firmly fixed in a usable signal strength.
Conclusion: construction went very quickly and receive last FullHD and HD + on the HDTV.