The PT-AT 5000E comes in a box with ordinary support elements, additionally secured lens, manual, CD-ROM, remote control and power cord, a start-up bonus Blu Ray in action for November / December 2011. An appropriate shutter glasses but you should order separately to , unfortunately is not included. After unpacking, plug in the cable, the initial operation of the projector, you should make the adjustment of the lens and adjusting the projection on the canvas. Is not difficult using the remote control, the projector menu and the adjustment lever next to the lens. Once these steps are processed, after turning on the projector is the cinema experience no more obstacles. A direct light from the outside (light, etc.) on the screen should be avoided, but this is self-explanatory. What you then see them, you did not expect. A bright, 2D Full HD image with saturated bright colors and an incredible contrast of black and white and the intervening shades of gray (the default setting in the menu, there was nothing of me yet changed). This is due to 2000 ANSI lumens lamp strong. A subjective image impression, as of a LCD panel previous TV. I knew from previous Panasonic projectors so not. The fan is blowing softly in the normal mode of the lamp, but not annoying to hear, you can switch the lamp in the ECO Mode, the fan noise is barely audible. The lamp power is, however, not or barely perceptible clouded in their brightness. When the projector is fed with 3D through HDMI (Blu Ray) and to activate the matching shutter glasses, you will experience a stable 3D cinema experience at its best with a constant sense of depth, whether you look or at right angles or at an angle in front of the screen at a distance of 6m 2m is it. By shutter technique Although about one-third of the light projection surface of the swallows, but I get a 3D picture without crosstalk from the left image to the right image, and vice versa. A 3D video signal from the satellite receiver in 3D Side-by-Side format is recognized without problems (HDMI 1.4 cable) and illustrated with 3D FullHD. If the automatic detection of the side-by-side format do not work, just in the setup menu, set "3D Settings" to "coexistence", this will work. Furthermore, you can adjust the brightness of the shutter glasses in 3 steps in the Network menu, here I can regain lost brightness. Also, adjustment of the right against the left 3D image in color, contrast, brightness, saturation, tint, etc. possible, so that you 3D content individually can adapt to the personal Sehgeschmack itself. The strength of the integrated IR emitters is sufficient for a distance of 5-6 meters, projector - screen - glasses when on average thickness represents the infrared transmitter in the projector menu (closed space). And many more settings, you can not write it all down. My conclusion: A strong projector with excellent 3D and 2D HDTV presentation, for the money the performance was to be expected and you are guaranteed not disappointed. Therefore, 5 stars from me. I am thrilled and can only write, welcome to the club of the 3D home theater enthusiasts.