Installation of the console turned into practice (despite the enclosed installation instructions) as not so easy out. It begins with you on the radio from the radio slot (at least to some extent) needs to develop, because one of the metal tabs need in the radio slot. Another metal nose must be pushed between the heating controls and the cover (Caution, here of scratching the veneer) and ultimately the whole thing is on a 3rd point in the glove compartment by means of a screw (!) Attached. Overall, a little sensitively "dosed" use of force is needed everywhere. When a screw top Brodit holder on the console (optional, by screws) I had the feeling that the plastic of the console has jumped under the pressure of the screws (holds still very good). Overall, the console but is now rock solid mounted and can probably carry all sorts of things. The mounting place strikes me as quite useful, although the distance from the rightmost heating control element of the Twingo is a little small. My Conclusion: If you have the thing mounted first, then it holds also what. Schön would have been if a little tool (plastic spatula to pry the cover) would by lying and if you'd known beforehand that you have to expand the radio part.
