because my old shell was broken and it was time for ne new, I decided for the product of Aursen.
The shipment of the product went faster by equipping as I thought, it came on Saturday to arrive even though it according to Amazon only between Tuesday and Friday of next week sollte.Schon times a big praise to the seller.
The shell comes in a very elegant metal packaging, with a letter in which a cleaning cloth, a protective film and a small card from Aursen team is.
Furthermore you will find a 2-sided small screwdriver, qualitatively ok, just does the job, only one could make the Phillips screwdriver bit better, because the notches are bit too flat I find it a little hard the screw so good out turn without paint damaging. But as I said, it served its purpose.
Total 4 screws are included, because you only need 1 for mounting the cover, it is more than practice this will equal 4 settled, since they are quite small and you can just easily lose.
Otherwise, the shell is as yet well secured there that mounting the shell goes quickly, but it would be handy as who you will also find a small assembly instructions could put the letter on Amazon.
Now I will enumerate a few Pro, Contra, and Neutral points:
Pro:
- The mobile phone works through the shell much higher quality, the Samsung logo would not be on the front you could not realize it.
- Shipping Faster
- Packaging and delivery is Premium justice.
Neutral:
- In some places, I found small scratches on the Silver Entgratungen what is not so bad but, because there would always gather with time scratches.
- The deburring on the back of the case could be calm as great as on the front, is not so that you would cut, but it is therefore quite something uncomfortable in the hand and restricts somewhat the operation of the side buttons ein.Nichts Tragic but could be improved.
- The Firm logo on the back looks very beautiful and makes the whole again something precious, but what is bothering me the advertising slogan underneath, this mixture of German and English is just not good.
- The speaker cover is glued in my Slanted, looks obliquely.
Now for the negative points:
- The On / Off and volume up / down keys are quite used to. The On / Off switch is almost on a level with the frame but makes the typical clicking feedback. Only stupid that if you press too far up or too far down this expresses itself stuck in the frame and that happens pretty quickly by the press so flat and has no point of reference offers, you do not know if you caught in the middle.
The high / low keys are as flat and almost flat as the On / Off button, the + button is a slight not feedback so a click as the ON / OFF button, but you can feel it, the - key but behaves like ne touch button , with me is no feedback.
In short: The side keys can be personally operate heavy and quite uncomfortable by the edge of the back for me.
- In some places on the front looks the chrome frame of the Samsung S4 through what is particular not bad, especially just at the corners of the frame is not only visible special there is also a small gap between the frame and the shell of the S4. As can be quickly dirt and other things inside collecting especially with me because I was in the industry Work. Pass is just something else.
- The opening of the camera is much too big for my taste, above the camera is still 1mm square, the sides about 0.5 mm. In addition, sometimes I get the feeling the imbalance is the camera in it, anyway.
- On the subject fit, if I like the phone in the case easy to move the phone to the shell Shake Listen and Feel I, VII is also the reason why it looks as if the camera sometimes slightly askew in Case. In addition, the lower micro is sometimes covered up to half, it Help Although if I phone the Case press but then comes back the battery cover slightly forward and after a short time the micro is again half covered.
How and whether the phone ever Protects I do not know, I did not try it but also from.
A star is available for quick delivery.
A star there for the beautiful packaging and delivery.
And a star is available for the design of the shell.
On the whole, I do not know what to make of the case, it looks very good and makes NEN SysEx impressive, but the flaws but in my eyes severe vll I have a Monday model caught?
Am wondering about whether I would rather back end and look around me elsewhere.
PS: I do not want to speak badly, it is the manufacturer serve the product to improve the product.
MFG