The manual is provided in English and Chinese.
So here is my manual:
Geographic button layout:
Taking the watch in front of you, the 3 useful buttons for special functions of the watch are left.
The right center button serves to set the time. (And stops the second hand)
The top and right button is the microphone. He unscrews.
0) Loading of the watch:
Unscrew the left middle button: this is where you plug in the jack cable supplied.
Firmly jack and then plug the USB part on your computer, you will have access to the memory of the watch and its directories. A full charge takes between 2 and 3 hours. Allow an extra hour in the first 5 uses to saturate the lithium-ion battery cells and obtain maximum efficiency.
1) Time setting digital tag your photos and videos:
Just edit time.txt a file containing the date and time format: (remove the quotation marks but keep the space from the end)
"2013.08.28 11:12:00 p.m."
When the watch is disconnected from the computer, turn on the tag and it will adjust its clock to that of the file.
2) Turn the clock on or off:
The status indicator light of the watch is at the bottom and right at 4:30. (The camera lens is at 6 o'clock)
To turn it on, pressing two seconds on the bottom button. The indicator turns red and then turns blue in a standby state.
To turn off, even manipulation. The light flashes red 3 times and then goes out.
Note that this is the same manipulation to stop a video recording.
3) Take a picture:
Turn the watch. Expect it to be in a standby state (blue light)
A short press on the top button, the light turns red to blue the picture is taken.
4) Dictaphone:
Turn the watch. Expect it to be in a standby state (blue light)
Support two seconds on the top button, the LED flashes red 3 times then turns off, voice recording starts. Of course you have not forgotten to unscrew the microphone!
Judgement of the voice recording is done by briefly pressing the top button. The warning light turns blue. Recording is complete.
5) Record video:
Turn the watch. Expect it to be in a standby state (blue light)
The trigger recording is done by briefly pressing the bottom button.
The blue light will flash three times. Video recording begins.
Of course you still have not forgotten to unscrew the microphone!
The video recording stop is made by pressing two seconds on the bottom button.
The indicator will flash red three times and sarrêtera watch.
6) Reset / Reset:
In case it would be necessary to reset the watch.
Turn the watch. Expect it to be in a standby state (blue light)
Press simultaneously the button on the top and bottom.
The indicator goes off. The watch is reset and turned off.
7) file transfers, technical data:
A 25-minute video recording generates a 870 MB file that will transfer in USB2 on a PC in 8 minutes. (These data are from my PC, transfer time may be different on your machine)
Battery life: my first test of independence have a range of more than 1:30
8) If you attempt to do operations in a video recording, the LED will flash 3 times in blue to warn that the watch is already occupied ... Then stop check-through support of two seconds on the button down. Note that this operation also completed a voice recording.