The delivery was complete. The enclosed DIN A5 manual is well illustrated (perhaps printed a bit small for people with mild visual impairment) and assembly are likely to have only one place a misunderstanding: When assembling the Stablisierungs cross plate between the lateral bottom parts there are 3 alternatives. These are successively shown in the manual and not first in a variant overview. Here it may happen that the said part must again be dismantled. But is not really a problem.
All drill holes are in the right place and the cabinet can also be mounted well alone.
When assembled the cabinet over looks exactly like the product picture. However, one should not expect too much from the quality you look. The coating of the plates is extremely thin. When screwing together, one should be very careful because this can tear immediately when tightening the screws.
Unfortunately, even the doors are not better processed. One of the two doors is at the edge of the viewing area damaged (see Fig. To). This is very unpleasant, but you can see it just as well after the complete unpacking and a return is complex. Presumably therefore speculated the manufacturer. Otherwise, it is not understandable for me why the chipboard are not processed in accordance with at least the field of vision (eg edge protection). On the quality of a well-known Swedish furniture manufacturer's quality does not reach this point! Also missing, for example, small rubber spacers for the doors. This beat when closing unprotected on the frame.
All in all a quite useful article that at least fits exactly to the washing machine in my case. Incidentally, even if under the WaMa another Dämmschutzmatte (2 cm thick) is available at hardware stores. The cabinet makes a little rickety impression and I can not, unfortunately, attached to the wall. Who his own ennt a WaMa that tends to "drift", the acquisition should think twice. I would imagine that the cabinet then eventually faded away ...
