The coupling with RTX was minutes after reading circulating on the Internet instructions executed within 5 right away. The connection is well and noise-free, 4 DECT phones are connected.
The question arises as to the best location in the house for the repeater, if possible, all corners are detected by. Since it is 4 Siemens Gigaset phones, there is an option, with which you can use the phones as a measuring device (eg. B. S68H, but newer devices). For this you have to switch the cordless unit in the service mode:
1. The appliance must be logged in at the base (in the case in close proximity to the repeater).
2. Switch off the handset
3. Press and hold simultaneously the numeric keypad buttons 1 + 4 + 7 while turning on the power with the red handset button.
4. The message "i service"
5. Enter the sequence of numbers 76200, then appears a selection menu, select the option "Metering Mode".
6. Switch off and on again.
7. The top display now appears a line with digits (eg. B. 089.9,06,03,100), wherein the first value the damping characteristic reproduces (RSSI) and not 8. The phones should be distributed at critical points, using a another person you can now optimize the position of the DECT repeater to obtain possible at all points a satisfactory signal.
9. Reset After the procedure is complete, the phones by deactivating the "Metering Mode" back to normal status. This same procedure as for the activation, and then simply remove the tick set again. On again, then the line has disappeared.
HAPPY CALLING !!