The disadvantage (as with many other printers also) that it indicates the empty toner and print refuses, without which the toner is really empty ... I write the review because it happened degree with me ... but it there Remedy ...
The statement exclusively - at your own risk - follow when the toner is displayed empty ... then you have nothing to lose anyway because the alternative would be that you have to buy a new toner ...
1. Open the door, take out the toner with holder, left press the green button and the toner take out ... toner on the page open (2 silver screws holding a black plastic cover Attention: Do not open the round plastic cover for the toner compartment is the wrong side) under the cover are 3 gears, of which the center and right and remove (just look at how it was before it) a half turn it on again ... put the youtube tutorial I've found says that the mark about direction 4 should show clock ... then the middle sit on again and the cover screw again ... if that is too cumbersome ... on YouTube are also videos that show the ... many of them do not have a 4 wheel all right, that does not exist in my toner and is seemingly not important, important is the position of the 3rd wheel ... just search on Youtube then how one would make if you were refilling the toner itself ... and then the use video for the designated part of me, as I said do not open the toner cover ...
2. Printer reseten ... flap for the toner on, printer ..., Go button and hold printer, all the lights are lit, then the Go button 2 times, wait a moment, Go button 6 times press, flap again ... ready ... possibly printer then again and make, but that's it ...
when he with me just refused to continue printing, I have done just that and then have about 200 pages for school printed ... and there is still nothing of it to appear in your printouts that really Toner missing ...
