To mount the Brocken is the expansion of the mainboard inevitable. For the different bases EKL has provided appropriately different mounting material, and a Quick Start Guide, thermal compound and the 120mm large purple glowing fan.
The assembly was not very difficult, as then the fan was on the mainboard he began to look a little imposing, if one compares it with the AMD model. The fan must be attached with metal clasps. So screw eliminates a bit of strength you needed already at over span. I had the easier with a screwdriver.
For another fan two additional clips are provided and 4 silicone nubs (which I now NEN times) that are attached to the ventilator and then be between fan and heatsink.
A small gripe I have though. For the AMD socket can attach the fan only or down. Thus, the air can not be blown out to the rear of the chassis. In my case, however, a fan is also in the lid. Provides so then not constitute Probelm.
Using software I the temperature then measured. With a fully-rotating case fans (2 Antec TriCool 120mm fan in the Antec Performance One 183) I came on Windows at 30 ° C under while playing Crysis after 40 minutes at 39 ° C (as monitored by Everest Ultimate Edition).
If you have an Intel Socket is recommended this cooler clear. Owners of AMD socket should look, the air of the fan may pull up well. If it does, then it can also be accessed safely here.
