Easy to set up and interesting at the possibility of establishing VLANs and ARRAY for businesses.
Would recommend without reservation.
At the reception:
- To put the new firmware rev 2.02 B
- Consider changing the dlink the base IP address is 192.168.0.50 (default, password = password) if you connect it to a box (192.168.1.1) for example (so a different sub network)
Put it in so dlink dap 2360 a static IP address eg 192.168.1.54
To do this:
dlink connect only to PC via ethernet cable set under Windows 08/07 in addressing ethernet NIC with an IPv4 address
192.168.0.2
mask 255 255 255 0
nothingness gateway
dns nothingness
then enter 192.168.0.50 in the URL address bar of chrome ...
the web GUI will appear and set the finely ...
and especially to change the static IP address of 192.168.1.54 in dlink (save and save)
you put everything under windows automatic addressing IPV4 7/8
dlink and reconnect the ethernet to the box (eth0) and therefore direct access 192.168.1.54 Ethernet access via a PC connected to an ethernet port also on the box (eth1) for all manipulations.