Switches with an audible clacking relay and a delay of just under 1 sec both a light bulb of 60W as well as an LED of 6W. The motion sensitivity is appropriate. The light sensitivity but not - even with completely sufficient brightness, the detector switches on the light. The settings can be made with microswitches ("mice Piano"). This has the advantage that you know immediately what you've set, but you can not set any intermediate values. The photosensitivity can be only one or exhibit, and the threshold is set far too high.
The casing is small enough to be installed in many ceiling / wall lamps. The sensor must of course remain outside.
The connection is simple, it will be 2 wires of the lamp is required. But beware: keep to the color coding described, because the drawing suggested a different, incorrect wiring!
