The screwdriver is supplied in a carrying case Kund by all parts are safely housed broadly. only the description of the device, which I always like to have in the machine, so you do not have to always look after later, when time is something that can not find a suitable space in your suitcase. Here it would be desirable if the case a suitable slot would have somewhere where you could tuck the paper (Was with my Atlas Copco solved and since I have found to be very good.
Now for the screwdriver. The wrench fits comfortably in your hand, the chuck can be operated with one hand and operating properly. Switching to drilling screws or percussion drilling is also good, the double ring is where then set the second ring of Schraubwiederstand is a bit strange, but also is easy to do. For the size of the unit I must say it is very good in the hand. I have lots of screwdrivers dabbled at the hardware store, whether Bosch, AEG, Metabo or B & D have not so good like me. Only the 10.8 V screwdriver from Metabo still liked, but had too little power.
The Makita hugs well and is well balanced. Even if one takes the second hand to help you get the device safely. When screws, you can let the machine start slowly, which was important to me. Simple drilling goes loose and at 18V also ohen major problems.
When percussion drilling, however, one must not expect miracles. I have several test holes gamacht namely in clinker, lime-sand-stone and impermeable concrete. In clinker and stone drilling holes with up to 8mm in diameter is possible. In concrete, however, the device quickly reaches its limits. A 6mm hole in the concrete floor was Schin produce considerably difficult because I then afterwards the hammer used. But I do not see here the main sphere of activity of the unit, special more quick times in the house bore the emergency program as a hole to a picture to hang a blanket woody, or endless screws, times are now the things for which a cordless screwdriver is mainly needed. For holes in concrete, there has other friends and helpers.
All in all I am very satisfied with the device. The price-performance ratio.
To emphasize is still the supplied multi charger, the UIN about 20 minutes fully charges the battery attached and thus raises the work never get bored.
Many other devices in this price range have einenLlader, which is often more than an hour on the way here.
For me, four stars. I prefer a star off because the Schlagbohrleistung not quite stand up to the promises of the product description.
