Installation of wall bracket went off without any problems. In the wall-side base plate 7 possible mounting points are available. There are 4 screws with incl (masonry / concrete). Dowels. There are on site 10 mm drill for min. 80 mm deep drill holes required. Depending on the weight of the TV set 2, 3 or 4 holes can be created in the opinion of the user. The VESA plate with 4 screws on the TV casing fixed (multiple screws of different diameters and lengths, as well as 2 types of spacers - 4 pieces - are included) and then hung on the support structure fixed to the wall and secured with 2 nuts on the bracket , That alone can make a person. Before mounting you should make a sketch to determine the proper placement of the wall holes, so that the pivoting range of the bracket can be optimally utilized. For a 10 kg heavy TV set I have created only 2 wall holes and the bracket sits absolutely firmly to the wall. The VESA base to the TV set may be subsequently adjusted so that the TV set is aligned exactly horizontally. The Invision wall mount leaves no wishes unfulfilled and is well made. The adjustability is given, but a direct effect on the folding direction directly on the mount is by design when folding useful to avoid overloading the TV housing. Since I rarely change the position of the TV playing for me but not matter. The cable guides are well integrated in the holder. The VESA plate can possibly hide connectors or vents on the back of the TV set. Then the included spacers are to be used and if necessary to use special (for example) angled cable plugs in the individual case. But this can be observed in almost any fixture and does not lead to a devaluation. Price / performance is OK
