I bought this castle for my motorcycle tours. Because I drive a sports tourer and no case should like to make it, I'm always an opportunity to my helmet and thick jacket with a visit to a castle, etc. be stowed so that I do not have to worry about the return trip "topless" to have to compete. For this reason, I needed a castle with a long cable to pull it through the helmet and jacket sleeves can. When unpacking the cable lock it made a cheap impression. The cable is thicker than the comparable "brand locks", but what is good for me because it is surrounded by a rubber jacket and makes no unsightly scratches on the paint. Really great is the length above average 2m allow a lot of leeway in the attachment. After I had gepult the thing from the vacuum package, I tried to change the numerical code to open the lock. The description is coherent and simple, but here was the "quality" of the castle. Using a screwdriver, you have a small screw to 90 degrees at the bottom of the lock turn, to release the mechanism. The screw is too tight, which is why we slip with light pressure on the stepping up of time, so that the screw "around" is because the metal is so soft. Pressing solid to prevent the over slides, so pressing the screw deep into the mechanism inside and is no longer with the screwdriver to the screw head. After a long Frickelei I have finally managed to set the code and to turn the screw for locking back, however, convinced of not Drehradmechanismus of numerical codes also. Huge scope for the individual figures can appear there as if it does not matter what code is adjusted to open ' All in all, I just need a lock against casual thieves, but this castle was good enough, but who puts a little emphasis on quality and safety, should desist from this castle.