I have already bought more films of atFoliX and my positive experiences were confirmed in this film again:
Perfect fit.
Easy and bubble-free deposit.
Good anti-reflection without loss of quality of displays.
Although I have already a lot of experience when it comes to applying screen protectors, but with a little patience, it should in this film, even for beginners, absolutely no trouble.
When it works Kindle namely much easier than with other devices; Can walk around by the relatively high edge around the display to the film simply invest on an edge, and then remove them using the enclosed spatula slowly on the display. I have not even needed a minute to the whole process.
The instructions in the manual one should heed this essential:
The work surface should be clean. A tablecloth or similar is unsuitable because it - can be "magnetically" attracted dust - by static electricity.
The display must be clean and completely free of dust. A microfiber cloth is the film.
The carrier film is then peeled off and applied a piece of the film at one edge of the display.
Then slowly underscore the film with the enclosed spatula on the screen and pull off the carrier film slowly.
Short polish with the microfiber cloth at the end.
Done.
If you are not satisfied with the result, you can in theory simply peel the foil back and start over. Said, should be, in my experience, is avoided. Once the carrier film is completely peeled off, you can no longer touch the screen film without fingerprints remain on the adhesive surface of the film. Very ugly!
In addition, the probability is high that dust particles end up after pulling on the adhesive surface, which is difficult to get off again. Etc. A strip Tesa helps to distress.
So proceed prefer a little more cautious and save yourself the stress. ;-)
Conclusion: Absolutely recommendable film. With a little patience easy and hassle free to install.