The cable is used:
RAS, numbering 100, they are not very long, I would have preferred them to be transparent rather than all colors.
The crimping tool:
RAS also, it has set a few cables that I have done, there is just a little game at the cutting point for cutting the son beyond, sometimes it does not sever the first blow.
The RJ45 sockets:
50 RJ45 plugs for your cables yourself. There is a stop, they are not completely drilled to exceed son, adjust the cable and cut what exceeds thereafter. You are therefore obliged to adjust the cutting son before inserted into the socket, making none of my cables is not clean, there was some son of a millimeter beyond the assumption, therefore a bad point . Rubber sleeves for protecting the outlet and correctly finish the cables would have been useful, but they are not provided.
Cable:
Cat 6 UTP (shield on the cable) multibrun. the screen is a little strange is the red plastic rather than aluminum foil, but good.
I did spent in telephone ducts, the cable is quite broad but flexible (multibrun), it happened quite easily with a cable winch and a little dishwashing liquid!
I used to connect two Gigabit switches between them, no flow problem (1Gb / s under Windows) or failure. I have connected the two ends with 2 RJ45 wall outlets at Casto, without problems, so RAS.
Please note the cable is black which is not suitable for all interior if you make your cables yourself.
I said that I had never done RJ45 cabling or network cable into a wall jack RJ45, but I get to do whatever I wanted with this pack and some tutorials on the internet (including the standard RJ45 cable A or B).
To conclude,
The pros:
- 100m cable shielded CAT6 good quality, the price is affordable although found cheaper on Amazon
- All the tools to do the network installation (perhaps lacking a plastic stripper)
The -:
- Not really practical RJ45 sockets, the Internet we find breakthroughs from beginning to end to adjust the cutting son after insertion into the socket
- The cable is, I have no use and I do not see when you make a network cabling
- I think you can find cheaper by buying all independently (clamp, cable, RJ45) or for products of better quality.