Even in cold optimal functionality

While we have our stairs all equipped with motion sensors, so you do not have to take the stairs in the dark, but our little girl at some points then but still too small for the motion. Therefore, these small LED wall lights just came to us right.

But before they can do their work with us, they first had a weekend survive in a hut.

The wall lights are about 8.3 x 9.9 x 2.3 cm in size. The motion sensor of the wall light reacts immediately and without hesitation. The light is bright, but pleasant just at night. The package contains also are still a manual (English / German / French / Japanese) and various mounting hardware (screws or Schaumgummiklebepads). You can see the lights so either screw on the wall or stick.

For the first application we had the lamps only erected without further fastening material. This worked very well because the lights are correspondingly wide and therefore remain standing safely. The event at the hut went over three days, the roof is the dormitory, which can be reached through a wooden stairs. Will someone at night, for example, to the toilet, he had until now always look for the switch for the lamp buttons, this turn, down the stairs and go up again and can be anmurren case, because the light is so bright and all blinded.

Therefore, we thought we would bring a little relaxation in this situation and use the wall lights, first here and assemble them only afterwards in our house. We have put the lights on the stairs along, on the second night even on the stairs. That worked very well, the lights responded very quickly, the light was enough good, so that no one fell down and was fast enough again before anyone could complain about the brightness at night.

The wall lights per lamp need four AA batteries which are not included. The light is pleasant and radiates in a beautiful angle, so that a larger area could be illuminated thereby.

Although it was very cold weekend (minus degrees), the dormitory and the stairs were not heated, the wall lights worked properly.

The wall lights can not be switched on or off manually. Both the inputs as well as turning off is automatic. The lamps react separated from each other, so they came on the stairs one by one.

Conclusion:
The acid test have passed the three wall lights properly, now they are allowed in the heat and do their service in the future of my kids light up at night the way.