My whole CM + + proco cooler measure just under 79mm (measured twice decimeter) and I still play 5mm above!
Anyway, everything fits perfectly into this box, but it must be very "logical" in the order of installation: once the power supply and motherboard fixed, better take an interest in the passage of cables, otherwise not longer have access after the introduction of SD and the optical drive.
A offers these cables, this is the first disappointment with this case: the "chair" hard drive bracket can not be set up if the power supply connector / motherboard (the one with lots of pins) is not bent ! Even trying to gently bend the cables, impossible to pass between the legs of the "chair". I do can not be unlucky, but I have to disconnect raged, redo all my cables passages to change the location of the HDD (both locations are provided opposite in the housing ... ).
The second disappointment concerns the LEDs on the front of the case: that the HDD is not flashing depending on disk activity, it lights up "more or less". Understand that the intensity varies instead of the usual blink. Finally, I disconnected.
And the "On / Off" is MUCH too powerful. I recall that it is a desktop box for a htpc, and that rarely dips into a film with the light of lit room! And well there, you'll get a blue LED that smashes you eyes for 2:00 (or 4:00 if you're a fan of LOTR, lol).
Apart from these minor flaws that you will quickly adjust tinkering (for HDD) with a shot of black marker (for loupiote), this cabinet is finished in a very nice TV stand next to a amp, in short, that happiness!
EDIT: I forgot to mention what seems to be obvious but could be used for certain: we must of course use a low profile graphics card, or alternatively, adjust its card based. Personally, I ordered "; qid = 1366966207 & sr = 8-1 & keywords = equerre + + low profile" and I'm very happy (see my review).
