However, the supply in the outlet network was still a 200 adapter, and after some time to ponder then of course by whether the switch brings here on 500 any speed advantage. To make it short, I understand enough of electronics and network technology that I can not distinguish gross and net speeds just like me on the 200 MB / s and 500 MB / s think - I really went there only to nominal speed increase.
The new Wi-Fi adapter devolo dLAN 500 WiFi is now finally be reused freely in a size in the double sockets and the configuration is with the updated cockpit software (or the configuration of the device (= window) done quickly). Feels like I would say that access to NAS and music library in Sooloos faster (I have not measured it - the 200 WiFi, the cockpit display showed 189 MB and 224 MB of now). Now the 200 changes to my son to the upper floor, while "fell" from 112 - but that is in the Internet and I have over 2 floors still acceptable)
The change of "feed" into the outlet network of 200 to 500 has been apparently no visible success. Here I was hoping for, especially on the second 500 in the network (stereo, PS3) more increase. Therefore, I have times a configuration consisting only tested from the two adapters (ie 2x500er) and thus all 200 removes a throttling may be eliminated by slow adapters - to no avail. Here really seems the current Kleis to the stereo depends - to prevent a higher transmission rate and the number of connected devices still there. That here I have to come up with another solution.
I find it interesting the way also that my Fritz box (7390) clean recognizes the Powerline Adapter, tw. Provides configuration and for the physical Geschwindidkeiten with displays. This also helps in the configuration of the entire home network.
I have a few screenshots of the Devolo cockpit display together added.
Oh yes - the here often mentioned "Pfieptöne" I could not understand. In my case this occurred neither in nor out at aisgeschalteten LED displays.
