Visually makes the case a better impression than expected. In the picture was not much to see, and I thought it would be similar to the housing is used as with me at work, but this was not the case.
The size of the housing is quite compact and thus the installation of individual components becomes quite difficult. The screws used and threaded screws for the motherboard are quite expensive nature. Unfortunately, you can not use the usual screws for mainboard and also must use the supplied.
As motherboard would be here probably a mATX motherboard is the better choice. I have an old Asus P5W DH Deluxe installed and purely get it only with break and choke. It fills the ground almost completely and I was able to deign it almost exclusively through the cooler.
When I use a cooler Xigmatek HDT-S1283, which in turn is problematic because the is so great that I now no longer the case wall get it. Will probably have to drill holes in the wall or try the Flex.
As I have a 500W power supply BeQuiet! (Think Dark Power Series) installed without cable management. The cable is not used here to fill almost entirely of the bays for the drives, so that I have installed no DVD drive.
The graphics card can be found here an old Radeon X1900XT use, to dispense with Crossfire must. The space fits GraKa technically very difficult in the housing and a renewed expansion is very difficult to realize. Had this unfortunately expand again and has already tasted some time that it can not be pulled off easily upwards, but somehow obliquely out and got stuck everywhere.
The wiring is also cross through the housing and place was not particularly easy to implement.
On the whole, for the price but very good use.