The machine was built after 1 hour but the base was too small, so I thought. I then contacted the manufacturer, who immediately sent to pick up a replacement frame with the commitment the old base free. But it turned out that the old base with 4 unusually attached plastic parts was expanded to the correct width. Habich not strapped. The operator's manual is not opened up to me. This could represent really better. Nevertheless, the manufacturer has responded promptly free. The quality is adequate for the price. So I was able to perform all of the desired wood works well. It lacks the tab on the most common angle. The engine is noisy and the speed anyway and might be greater. Although the possibility to connect an extraction is there, but virtually ineffective. But this Mango have many of the machines. If you consider that such a machine in the hobby room all messed up this is a major drawback though an extraction system is connected. After each saw a big cleanup. It is advantageous for the cutting depth and the cutting length. That does not at this price. For one of such things rarely used the right choice.