Everything you need is there, the "juice" which is placed on the original of the position and is thus transformed into standard ISO for any Car. With an additional antenna adapter as you need it.
The plastic cover, and that is also why I removed a star, not perfectly fits the shape of the dashboard, it fits rather well let's say, but a bit lacking in the flare top left ... It's a small thing but I specify it anyway.
Otherwise, for those who wonder if it is complicated to replace, not ben ha, simple! The hardest ultimately be returned completely new car radio because of the son that take up space in the rear.
Installation:
Remove two decorative covers of the dashboard (the right that goes to the door passager.et the other above the station until arriving Neiman). Just pull, it is unclipped.
Two screws to unscrew each end of the sending station and hop it just comes by pulling slightly.
Remove the "juice" big black origin of the position, just pull FORT but without breaking the black clip attached to this Suc, it is a kind of lever. Then is replaced by the adapter provided here by inserting it in the opposite manner.
It reconnects the ISO to the original car radio and put the contact to the test
If everything is OK, place the new position, tighten the two screws, and replace both covers.
CAUTION: Original BMW car radio has a "booster" antenna is made in a small cable you will need to remove when replacing the original car radio is a small cable with a round plug, but this cable does not exist on ordinary market car stereos ... I must really connect the Blue REMOTE our new cable car radio to the other blue wire ... IF you do not, the quality of the radio will be very very poor and almost impossible to listen on the move ...
It was to help this little tutorial editing, to return the product, so that the joy of finally being able to enjoy a radio with USB key and a much better sound quality !! Because yes, the original BMW car radio is very bad, at least I had the K7 ... The new radio is stronger, with better depth of sound and good bass :-)
For the price, do not hesitate !!! Time to replace everything ~ 30 min, and which takes the most time, is to get back to the job fully and therefore has to place the cables in the back.