Funksteckdosen with DIP switches

The funct sockets are fitted with dip-switches, so that they can be easily programmed to avoid conflicts with other remotes or radio sets. The DIP switches in the remote control are easily accessible and also adjust with the fingers that are in the sockets no longer be reached with a finger because they are situated in a narrow shaft. In addition, the screws are factory totally turned out that this can be screwed with finesse at all. The housing of the outlets are not processed particularly wertig, but with a helpful red LED (on if power outlet) equipped. It is possible the sockets with a Raspberry Pi to control (with a corresponding transmitter module). The remote control is not particularly handsome and relatively large, therefore but is probably not too quickly lost. The specified maximum range of 25 meters I could not reach 10m but were possible.

Point deduction is available for the case processing and the miserable screws, all in all function the outlets as described, however.