The construction of the band saw itself is well thought out, the version of the assembly professionally, actually everything more than satisfactory. Only with the balancing of the driving wheels, it is not as expected. In a YouTube video someone put a coin on edge on the saw table, they did not fall. I can not dare, unfortunately, although the walk is well balanced un the saw on concrete floor is firm and secure. After the Abdecktüren opening it will be seen that the balancing should be achieved by abrading the wheels. Have any not so strictly speaking. When they saw was still built in Japan, was about not ignore gone so carelessly. Otherwise, the saw works well, even 150mm tall beech woods -and Esch can be separated quite feinfühlung. The cut surfaces are mindful of the coarse tooth pitch surprisingly smoothly, with acceptable surface roughness. Use the fine-toothed blade I have not worked. All in all a fine tool, maybe there is a service that the wheels can make time itself., Although, as this phenomenon does not always occur equally, it could also be a dynamic excitation of the system, which unfortunately just in the speed range lies.