The Case came safe and well with me.
It comes with the case, a back sheet and a certificate of authenticity were what you can get online.
The back of the case is made of transparent polycarbonate. What is very strong and stable.
At the back, a protective film is applied to protect it during transportation from scratches.
The frame is made of it a kind of hard silicone or soft plastic in the color graphite.
The appearance of the case is very good, it looks very chic and also acts by no means cheap.
The weight is very light, it does not gives the Samsung Galaxy S6 much more weight.
This is due to plastic.
Would it be an aluminum case, this would of course be much more difficult.
The frame is thin but not too thin held that the Galaxy S6 would not be protected.
What I find very good, the frame is about 2 mm on the screen. Thus, the display would be protected from scratches whom you put the S6 z. B. on a table or it falls on a smooth floor.
Is it similar to mine on a Stony ground brings the course, not quite as much.
Luckily I had a screen overlay plan that protected the display. Hab just after the film again display was still and scratch free.
The fit of the case is very good is not too loose but not so tight that you can not get out anymore smartphone.
The controls like power button and a loud-quiet keys are well protected and can be operated without problems. For this purpose they are labeled beautiful from the outside. The other elements such as camera, microphone, micro-USB port are all easily accessible and freely saved.
The Transparent Case protect the Samsung Galaxy S6 from scratches and damage, but the smartphone largely retains its appearance because the case is transparent.
The price in the amount of 13.99 Euro is justified in my opinion.
![[Classic Design] Inateck USB 3.0 External Enclosure For external hard drive SATA 2.5 SSD and HDD 9.5mm 7mm (Electronics)](https://img.tgreer.com/thumb/85x85/5/e5/5e5093e9b8cb2be5.jpg)
