The lamp itself was chosen because the bulbs can be freely selected (color temperature / light output, etc.) and does not need the entire lamp in the event of a defect tonne (of the light bulb).
The build quality is flawless, installation and connection relatively easy. The base support is attached with three screws and spacers on the wall or ceiling.
Importantly, and neutral conductors are correctly identified and connected accordingly, otherwise the electronics goes flutes.
The lamp are rubber gaskets for all ports (cable entry, locking electronics on base) with, making it suitable for wet areas such as bathrooms.
Furthermore, another consumer can be connected (eg fan in the bathroom or second light source without sensor).
The settings are made via three knobs (Twilight, sensitivity, duration). This worked perfectly. Depending on individual requirements and the local conditions, a more or less long trial period is required for this purpose. Until the settings match, it is recommended not to mount the glass dome, since:
The glass dome is placed on three "noses" on the base plate and locked by turning. This works, but not very comfortable, as part of a not insignificant amount of force is required. -> When mounted in the bathroom, the connection must be "tight" also.
The switching noise when turning (a clunk) is (significantly) to hear, it does not interfere (hall / basement / staircase).
The sensor detection is, the right attitude assuming very good.
Conclusion:
Recommendation.
A solid, good product that is relatively easy to assemble and adjust can, at an acceptable price.