As the panel arrived at me, I was not 100% how I should install the thing at all. Namely, the
to hold four included mounting brackets unfortunately too large decently on the panel. Bin then just to
Vise and have the terminals again squeezed clean and lo and behold - they hold on plastic.
I recommend the center console expand prior to installation and then take the panel level - otherwise
one has the terminals too loose and they fall into the depths of a body ;-)
Until I had everything back together completely, the aperture control exposure also net so great and could be vertically shifted slightly.
Furthermore, I could not fix my good Alpine 1DIN slot, since the holding flags are not as well positioned.
