Good matte film

The film of kwmobile I find a lot better than the cheaper rival product. The kwmobile film is thinner and the surface appears to be a finer structure. This makes them better anti-reflective and reflects the light less pronounced than the other product. Likewise the moire or noise effect is somewhat less, by colored noise seems a bit disturbing while looking at the display. The effect is due to the extremely small pixels of the display together with the fine structure of the rough foil surface condition and can be observed more or less in each matt foil.

In matt films should be understood that the display slightly less sharp, paler and less Contrast acts. What bothers me is the but less than the fingerprints on smooth surfaces.

From touch sensation forth the dull protectors feel rough to that is clear and not everyone likes it. I think it's good, however, because this does not remain so easy to stick with wet fingers on the film and can thereby better slides across the screen ,

The installation was easy, fast and bubble-free possible. I needed only one attempt. However, I have some practice in the attachment
of protectors (see tips below). Is also good that the sheet of kwmobile not only on the underside has a protective film, but also on the top. So you can see the film during application underline something with a fingernail smooth without thereby damaging the surface.

The only drawback, which is why I do not equal one star wanted to pull off: There is unfortunately no film for the back of the device. Although kwmobile provides a protective film for the back separately, but but this seems clear and not to be Matt. Here I wish me also a matte film of the same material.

Here are my tips for easy attachment of the protective film:
1. With non-aggressive glass cleaner (sparingly!) Free the display from contamination.
2. The display with a dry lint-free cloth.
3. Remove with a soft dry cloth if necessary remaining streaks from glass cleaner and dust.
4. However, if dust may be present: with a fine brush to wipe adhering dust particles and thereby possibly slightly blow.
Eighth 5. plan that the fingers are clean (dust is transferred quickly from the fingers on the edges of the foil underside).
6. The film muster as described in the instructions.