Good product but started at smplifier

Please do not buy this product with an English outlet, not like me LOL, luckily I had an adapter.
In any case the product works well with SFR box, I box directly associated with the single button on the product, not forgetting to allow the box to accept this equipment by its own button temporary authorization to access, located on the left side.
As against cable, nothing happens as it should, despite the clear instructions and the address supplied by the manufacturer in IE10, instead of accessing the product control panel, one falls directly on a page where it is said the password and login ID are incorrect, then we should have a username and request a password to be set.
Bug firmware or incorrect address provided? I do not know.

Update IMPORTANT: FOR SOLVE THE PB OF LOGIN AND PASSWORD PROVIDED BY THE ETHERNET CABLE, I FOUND!
1) DISCONNECT THE POWER SECTOR BOX to disable the WiFi network!
2) It is necessary in the internet explore options, Security tab / customize the level in the User Authentication section, ensure that in Connecting, "automatic connection in Intranet zone" is checked and not "opening anonymous session ".

From that moment you will have access to the terminal TPLINK without problems and adjust its options, update the firmware (which I did).
You can download the complete manual on the manufacturer's website TPLINK, much better than the Quick Setup sheet supplied in the box, download the new firmware etc .....

Once configured, the wireless relay take the same channel as the box, so we no duplication, we only see once his box, so it's totally transparent to use, and the PC will automatically take the strongest signal to connect, depending on whether one is more or less close to his box or not.
Recent review, the product is beautiful, especially on;) and is very well finished, I recommend it despite its small start-up teething problems with an Ethernet cable.

Use inSSIDer 3 and see your box, your TPLINK Extender, the other box and you can choose a free Wifi channel where there is none, for a better flow and avoid packet collisions by interference from other box which occupy the same space that your Wifi :)

Good connection! :)
Patrick

Edit-SHIFT to 5 May 2014: ABSOLUTELY INSTALL THE LATEST AVAILABLE FIRMWARE, IL CORRECTED BUG THAT WAS AN IMPORTANT THAT WE WERE NOT ON THE APPLIANCE CONNECTED AUTOMATICALLY SWITCHED ON HOUSING TPLINK (IT WAS OFTEN THE BOX MANAGEMENT ACCOUNT ONLY, WHICH WAS MAKING THE REPEATER WIFI INEFFECTIVE UNLESS TO DISCONNECT / RECONNECT NEAR THE HOUSING AND MORE ......

THIS PROBLEM IS SOLVED WELL, I HAVE TESTED AND WELL NOW TAKE MY EQUIPMENT SIGNAL + THE STRONG AND INCLUDING REPEATER IF YOU ARE CLOSER TO HIM THAT YOUR BOX AND 50M IN THE GARDEN (REPEATER IN GARAGE, 1st FLOOR IN BOX) WIFI RECEPTION AND PERFECT POWERFUL.

IF POSSIBLE BY DISCONNECTING YOUR BOX TO GO IN OPTIONS SETTING REPEATER, PUT ON THE BANDWIDTH 40 MHz (AND NOT ON OR AUTO 20 MHZ) YOU EARN AND ALMOST double your POWER AND SCOPE OF 50 METERS OR IN GARDEN AS THE ISSUER ARE IN THE HOUSE .......... :)

PLACES I HAVE MY NEIGHBOR HELPING PU IN THE SIDEWALK IN FRONT STREET CONNECT AND TABLET SA (IT DOES NOT INTERNET) ON MY BOX, WITH SIGNAL LEVEL VERY SATISFIED, PREVIOUSLY IMPOSSIBLE THING!.