Good product, serves its purpose, silent

1 / Fast Shipping Amazon, as always. Congratulations again to its employees.
2 / Packing: the kit contains an installation guide not necessarily clear but which has the merit to exist.
3 / Facility: for one, Corsair Graphite 600T in a case, in 3 floors 5.25 "No. 1-2-3 from top Insert:. Minor problem hooking Corsair clips in the metal frame of honeycomb Black Vortex, once found the origin of nickel insertion problem, fixing screws (supplied) of the cage (1x per side because the Corsair clips blocking other screw holes anyway, which n ' is not a problem since with 2 screws already cage has no game). Think clear the Molex (1 black model as the classic white but with just 2 pins) for future connections. Do nothing blocks the adjacent location for CD / DVD / ...
4 / HDD Installation: screwing each HDD you intend to put on a small plastic block as you can see in the video presentation of the product, insert, locker, it does not move.
5 / Connection: RAS connect the Molex HDD; spacing is sufficient (home 4 HDD 3.5 ") between each disc ~ 2mm and do not mind a SATA or IDE connection (caution, however, a SATA cable angled connector plate and not desired)
6 / Operation: felt no vibration, no HDD or the fan. The noise of the fan (120mm) is almost inaudible word of 20cm, and in any case it did not change the overall noise produced by my camera (sorry no measure in dB). LED blue nice if you like the color, the picture on the Amazon site is pretty faithful and will give an idea.

-Ventilateur Suction (ambient air to inside the case) easily replaceable.
-Filter Easily cleanable dust even in operation; you must remove it to access the screws that secure the fan if desired to remove it to change it.
-I Did not notice the temperature changes (software: CPUID HWMonitor) my HDD before / after (note that the Corsair 600T is already very well ventilated base) range min / max [35 ° C 40 ° C] to 360 GB, 1TB, 2TB WD 160GB Maxtor 1 and 6 years old. Were placed in nacelles HDD Corsair 600T front 200mm fan in front before being moved to the IcyDock cage. The rest of the case does not heat most despite the aspiration of outside air; I planned already to install a 200mm fan (MegaFlow CM or perhaps a Noctua if they do not take too long to get their ventilos ... 200mm) on the side of my screened 600T to compensate, if I Installed think I will share changes.
-The Molex cable is a bit short, once stretched the fan on the back of the cage it exceeds 2-3 cm in total, no more.
-Bruit: As said above, for me it is insignificant. For those who own a 600T: I would like that ear: no noisier than a case of the basic 200mm ventilos when the potentiometer is set at minimum.
-NB: 2 front door handles protrude from the housing (here 600T) ie the front of the cage (wire mesh) comes flush with the front panel of the case; 2 handles them beyond.
-Material Of good quality, solid metal, screws and no good quality screws, easy access to the HDD via the front panel.

In a word, true to what I expected from what I had seen / read on the internet that is not much seen that this product was released last quarter 2013 ... (aside The course reviews the manufacturer) Silent, stylish (gamers;)) effective, easy to use, I recommend.

EDIT 26/01/2013: After research, the fan provided with the dock is a Runda Electronics, 2000rpm, 12V 0.12A, 92.2 CFM, 4.5mm H2O pressure to 32 dBA. I intend to replace it with a Noctua NF-P12 and NF-F12 (for better airflow between each disc, as they are quite tight) I will test them to see if they bring 2 sth cooling.