Are also needed:
1x role crepe tape for taping
1x stick to stir the paint - hardener mixture
1x bowl for mixing the mixture (no plastic to instructions, I have a cat food can taken);)
1x brush, possibly still big and small
1x steel brush, or essay for the drill
possibly goggles + dust mask depending on how important is health.
if you want to work very closely with the necessary tools to disassemble the brake, I have broken down with me and about 4h needed per caliper where mine were heavily rusted and I removed everything except the hose.
to then additionally necessary:
1x wire or string to hang the brake shoe on the shock absorber to relieve the brake hose !! Do not twist or kink !!!
1x lot of time and patience;)
the necessary tools, be careful as this usually no common sizes are ...!
I hope I did not forget anything!
The color was with me very liquid despite repeated stir the can. She has only really covered everything after I painted 3x, partly I have up to four layers applied so that it was equally nice and shiny. I will then upload a picture of a brake caliper.
The look definitely makes clear what her, before I had unfortunately forward fairly strong rusting on the brakes and now everything is nice and clean and shining, I'm glad I chose red in a white car.
To yield the color I have to say that was enough the box for 4 calipers on the front axle I have the calipers yet fully painted and the caliper support, back I went, however, in the "sleep mode" because I sure was not whether it actually enough for all four brakes. But I have all the components painted at least 3x and 4x visible places so that it shines beautifully.
Until it is really a beautiful piece of dry flies, besides, one should remember that you can not go right after it. I have a precaution 24 waited until I used it again, really hard, the color is according to instructions only after 7 days.
The whole activity should, however, only if you make idea has what you do and, above all, one should not paint the bleed screw and the connection of a brake hose with, the workshop will thank you !!!
If you have questions you are welcome to write, I hope I could help you.
Follow pictures ...
1 star deduction there was because of the opacity of the color, perhaps it was also due to the rough material of the brake calipers, the second layer was definitely much better already. As such, a top product, but my brother took one of the competition because the opacity was the first time emphasize a bit higher.
Have fun grind away rust;))
If I could help you, so that it would be glad if you he was helpful in my comment below clicks the, thank you !!