The planter is processed very clean and fit. Both the interfaces of the wood and the varnish are designed uniform throughout. The wood grain is visible through the glazing throughout. The planter is knocked out from the inside with a black film, which can be seen in the picture also. This extends to the upper edge and is intended to prevent the soil from coming into contact with the wood. On the bottom side of an outlet of plastic is mounted in the center, which serves as a drain for excess water and to verhinder waterlogging. Since the film on the ground throws some wrinkles, you should probably also pour some gravel or granules in the flower box and cover it with a water-permeable flow before giving ground in the box. It should be noted that the plant container can not be completely filled with soil because the soil is installed about 25cm above the ground and thus there remains a large cavity can not be filled with soil. The fillable volume corresponds to approximately the top two horizontal boards. The two lower boards enclose the cavity. This is certainly not a disadvantage. However, that is not visible on the Abbilding and restricts the mathematically possible volume of the bucket. I could fill the bucket with about 60 L potting soil. Overall, the bucket makes a very classy look and the quality of workmanship is convincing. Therefore, the money of the flower box is worth, in my opinion.
