Impressive ... 70

Already having a hammer drill and a screwdriver I did not see too usefulness of this wireless perfo.
But can not use my drill for installing a TV stand on the concrete of my apartment.
I wanted a not too big tool for handyman without evil skull to use, and versatile.
The Uneo has established for itself.
But little problem: Unable to find Leroy Merlin ... Only 14.4V release was (and still is on sale for 159)
Bosch they also released a 10.8V version (which is supposed to replace the 14.4V).
In short Maxx impossible to find even Casto out and joined Merlin they try to sell their stocks of 14.4V ...
What is the difference between these models?
The voltage and incidentally the striking force (there are in joules).
Autonomy is not in question when it comes to make a few holes in a wall.
The first version was 0.5 joules to 14.4V, but its battery was mostly incorporated in the body (impossible to change if it broke down ...)
The second is to 10.8V 0.5 Joules, but especially the possibility Dinter- change its battery if it falls in the harbor.
And finally the third Uneo Maxx 18V, is 0.6 joules, with a standard battery on a set of brand appliances.

Finally I managed to find it on Amazon for a reasonable price (store it takes 200 minimum).

At the opening of the box are:

- The perforator
- Some bits and bits to screw
- A multi-language manual
- The charger
- A battery
Note that the box is actually in storage and carrying case

The perfo comes already loaded party.
The battery is switched without problems in the unit.

To use a simple trigger falls in the index (that can also trigger "dosed" speed)
We insert the drill without any particular device the ring is pulled and not any net worth snaps shake a stick or anything else.

A small light turns down and illuminates where is drilled.
A lever controls the camera on a drill guide or screwdriver / drill (no impact).
A light meter indicates the remaining battery power and the sense of screwing.

I baptized him with the laying of a TV wall bracket in a concrete wall with a 8mm drill.
Frankly I had doubts when I saw the Uneo Maxx can break into this beautiful architectural concrete ...
In fact it took me less than 5 minutes to all my holes, no problem, good grip despite its weight. The non-slip handle well played its role.
For the rest of the assembly, I also used in screwdriver mode and ditto any difficulty.
It remains heavier than a conventional screwdriver but no worry to do the work.

Result:
Amazed at the ease of use.
Think to take Quick drills SDS (not those all round)
No regrets for this purchase and I recommend for small versatile work.

Good work to all and to all!

Pogyz

PS: You can find a box of Bosch for a small panel of drills and screws SDS quick format. You decide where to find the cheapest ...
(References: Bosch 2609256989 Accessory Set Uneo)