Moin moin, I also had my initial problems with the PS002. After installing the software, I was able to access the PS, but up to the first page it would take a while. But thanks to the existing recession I have it but then managed. And in retrospect, it is actually quite simple. Here are my instructions: first log into the router and see which address area in the DHCP server is set. an address aufschreiben.z. B. 192.168.1.xxx but not equal, take the first. Now the software from HP play (important the admin software). Start software and go into the settings. Password 1234 Name admin. Enter the previously-specified IP TCP / IP and IP to make static. When DHCP button set to Disable. Then install the printer or if already present change in the printer settings to connect to TCP Ip and enter the IP address there. then put on LPT and enter the queue name and already kanns go. Was with my Samsung CLP which here already called 300 as incompatible one must still take a hook in the printer settings. It says prepare print jobs on client computers. As long as the hook is not gone prints nothing. If yes possibly even with other models such as or similar available. Because the PS can yes the Druckauträge only forward but not processed. The only drawback is the existing only in English instructions therefore only 4 stars.
I can see the PS but definitely recommend and at the price anyway.