For the LAN access from the TV device and the AVR, I wanted to find an appropriate solution. Since I already began devices from devolo to combat the WLAN weakness, I reached again for products of this company to expand my internet from the socket.
Delivery
In large cardboard box is the following one:
dLAN 550+
Operating instructions
Ethernet cable
CD-ROM with PDF manual, configuration software
Technical Specifications
Standard: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az, IEEE1901, Auto MDI / X HomePlug
Protocols: CSMA / CA (Powerline)
Speed: Ethernet 10/100 (Mbps) Powerline 200/500 (mbps)
Range in m: Power Line: 400
Jacks: Type F (CEE 7/4) F (CEE 7/4) (DE, NL, ES, PT, AT, SE, FI, NO, GR, HU)
Output Power: 16 A
Connections: 2 x Ethernet RJ45,
Power: MaximalW / A 3.1 WTypischW / A 2.6 WStand-BYW / A: 0.6 W
Filters: 2-68 MHz
Dimensions: 110 x 55 x 40
Operating Systems: Windows 7 (32-bit), Windows 7 (64-bit), Windows 8.x (32-bit), Windows 8.x (64-bit), Linux Ubuntu 14.04 (32-bit), Linux Ubuntu 14.04 (64-bit ), MAC OS X 10:10
Appearance
The adapter is made of white plastic. Everything seems very well made and high quality. There is the normal power plug on the back side. In case the electronics plugged. From the front you can see a colored LED, the socket and the manufacturer's imprint. Located two LAN ports on the bottom.
Commissioning
The commissioning takes place very easily. First, one should look at all the items and read the instructions. Furthermore, one should note the code located on the back. Now you put the adapter into the socket of his choice and after 10 s was the adapter to use. Now even the adapter into the already existing software log and finish. In the software you can then read the appropriate connection speed. This also works with an app on your smartphone. If the connection speed is not sufficient, you should change the socket. So I have also experimented briefly and could also detect this. If further advice is required, you can pick up on the website instructions and suggestions. The adapter can be used both as a transmitter of the data or as a receiver. I use it because of the Range + technology as the sender.
Range + technology
With the Range + technology to be achieved up to 600 Mbit / s transfer rate. Conventional Powerline technology uses two of the three lines in the circuit (phase and neutral). Range + can also access the ground conductor and so uses the full physical bandwidth of the power line out. Thus a significantly higher transmission power is not only achieved, but also achieves a greater range. It is always the best way for the data signals used and automatically selected.
Software
After logging on to PC the appropriate firmware is checked again and reloaded and installed if necessary. One sees on the surface of the existing adapter and the currently applied rate. For me, I'm reading now 219 Mbit / sec. Furthermore, we have two or three riders on the adapters. Thus, the adapter can be configured. The program can reset the adapter to the initial values, update the software, add additional adapter and change the passwords. There are also apps for the corresponding terminals. Again, many features available and can also read the current speed. Furthermore, various tips for a faster connection will be displayed. By means of the configuration, a guest access selbiger are generated and released.
Use
After installing everything is ready for use. This requires no more than 10 minutes. Then you can get started. The connection to my devices always runs very good and stable. It is sufficient speed available. One can calmly stream a movie in HD. The exchange of other data must therefore also be fast enough. With a possible change of sockets or the shutdown of consumers in the respective power ring can lead to an improvement of the transmission. If you absolutely need a power outlet, it is always better to use, which is brought by adapter. Here influences are smallest. Otherwise, no disadvantages are identified. The application runs perfectly for about 14 days. The integration of the AVR and the HDD recorder runs easily. The signal strength is stable. To my existing starter kit WLAN 500 this can is fully compatible. The Wi-Fi devices will benefit from the new rank + technology.
Conclusion
A very good buy. After many failed attempts with other systems I have come to success. The device runs easily and quickly. The signal strength is stable and adequate for my needs. There are continuous firmware update available and the software is updated. Currently, there are new and more powerful products from Devolo. These are compatible with each other.
I forgive 5 of 5 stars.
