Nero DiscSpeed shows ID "MBI 01RG40" on these blanks are therefore not Sony but of Moser Baer India (on the package is Made in India). PI Errors may max. Be 280, Pi Failures. 4 It should be noted that when the burners Benq Pi Failures max. Result must be divided by 8.
Well first upper blank with Nero DiscSpeed with 8x and Benq Dw burned BSRB 1640, result unusable PI Failures 116 (approx 15 other burners). 2. blank also not good: PI Errors max 141 / Pi Failures max 60 (approx 8 other burners). 3. blank from the center of the spindle would then be burned only 4x, Result>: Pi Erros max 237, Pi Failures 7 (approx 1 in other burners). 4. blank from the lower Nonslip classification of the spindle, result: Will be fired only at 4x. Pi Error max. 126 Pi Failures max. 6
Conclusion: Only the blank is 4. Okay. All the others have too high a PI Erros and / or PI Failures .I can currently only advise against this unless there are blanks MBI 01RG40. This quality can be expected of cheap no-name brands but not Sony blanks, clearly that's not all in a spindle blanks but can be perfect when the results are so bad you have to look around for other blanks when the data on a will receive extended period. I appreciate the 20-30 blanks are scrap or for a decent video playback are not suitable or for a backup are not use to.
Tip: Philips DM 4 S 6 B 50 F / 00 ordered directly afterwards and worlds better than these blanks.
General Information
Drive: BENQ DVD DD DW1640
Firmware: BSRB
Disc: DVD-R (INFOMEDIAR30)
Selected speed: 8 X
PI Errors
Maximum: 67
Average: 6.80
Total: 114200
PI failures
Maximum: 6
Average: 0.00
Total: 483
PO failures: 0
Jitter
Maximum: 11.0%
Average: 8.97%
Scanning Statistics
Elapsed time: 9:21
Number of Samples: 16792
Average scanning interval: 8.00 ECC
Glitches removed: 0
