Liquid passes from the Einschaltbutton ...

The battery is of 3.7 - 4.8 volts adjustable. For this you have successively press the button 3 times quickly.
The LED will flash in the appropriate color (Red = 3.7V / 4.2V = green / white = 4.8V)

I smoke generally at 3.7V and am very satisfied with the development of steam (of course depends on the liquid mixture from).
The draw resistance can be controlled at the evaporator. It is a small thread available, so you can cover a total of 5 holes.
For my needs I leave a hole open and the draw resistance is optimal.

The EMOW is not as big as other battery carrier (16.5mm diameter) and is very comfortable to hold with the length of about 15.5 cm.
The flash and the steam development is just great. You quickly get used to the crackle of evaporation.
But most of all the cigarettes you get used quickly ;-)

The only shortcoming is; when the liquid is fully filled in the evaporator head and keeping the battery carrier standing, the appliance door is surprisingly only max. two-thirds full.

This is because that the Liquid after turning fills the thread bottom, and the level is accordingly drawn from the top.
With 1,8ml I have a Liquid always carry and refill during the workday 1x - but what bothers me a bit ..

The battery with 1.300mah is sufficient for the entire day.
However, the evening he should be charged to be the next morning not suddenly surprised that the battery gave up the ghost.
The risk to handle a Pyro is usually high if the part does not work anymore and no substitute exists ;-)

Steaming is really fun and so easy to make quitting smoking ;-)

---------------------------------------------------------------------------------------------------------------------
EDIT 25/02/2015:

I hereby revise my review on the EMOW.

After initial enthusiasm, my interest in this model is now lost.
The main reason is: It Sifft very strongly out on the switch.

I bought some EMOW devices on reserve because it actually "is a very good vapor.
But for all models Sifft Liquid, sooner or later, from the power button out.

But that's not the only criticism.
The technique with the ego-threaded receptacle is simply poorly developed.

At each evaporator head sooner or later running beneath some liquid out - either through lack of attraction force when screwing in the evaporator head or lack of care, respectively. Rinse the parts - which may be even more evident.

But despite daily care and maintenance should not happen so something definitely.

For battery-makers, the ad only recording with a screw thread (female) are provided, that does not happen in any case.
I have a long time to div. Models observed (EMOW Mega, IPow, Joyetech Delta I and II, etc.)

Often zickt also the cumbersome Charging with the USB adapter from Kangertech that has to be screwed onto the thread cumbersome.
In a second NoName PSU charging then works strangely again properly ..
Other models with micro USB port are much more practical and contemporary.

The strong scattering series of Kanger evaporator heads strained my nerves.
Each zweiet or Third (new) evaporator head are within a few hours or even at the beginning of the ghost:
It kokelt, there is no smoke present, or it tastes extremely by silicone.

During the first series of evaporator heads (V1) are still been a real reference "of Kangertech, you have shot with the V2 and V3 heads the goat. The failure of these heads is just too high.

The V1 heads the way you get a second silicon cover into the EMOW. In order for the steam experience is then better by a mile,
but due to the additional silicone cover, there is a risk that the steam sometime suddenly tastes disgusting to silicone.

These gimmicks I had just fed up after a while!

Finally, it should be mentioned:. In case of accidental overturning of the battery carrier, for example on the table, it's over with the EMOW fun.
The device is then no longer straight, but a Leaning Tower of Pisa.
Either bend this a) of the evaporator, b) the thread on the battery carrier or c) fragmented the thin glass.

I think a mistake or falling over the device should withstand.
Of course you should always be careful with an electrical appliance, but the benefits of e-cigarette involves simply a risk that it falls over time, or even fall off. We all have only two hands ... the handling of the e-cigarette around all day ...

Regardless of whether the unit down or has fallen: It is undamaged and irrevocably siffen from Einschaltbutton!

A faulty battery carrier I opened this time trial basis. Under the eGo-thread is simply a small plastic cover that protects the two wires.
This cover is not sealed to the electronics and prevents in no case that liquid runs out of the thread down.
The Liquid runs on the cover over the metal edge, direction Einschaltbutton down.
After some time occurs Liquid and below, the battery carrier ground out.

Smeared hands are thus constant companion of this e-cigarette!
Apart from that fluid or liquid runs close to the electronics over, I find very questionable!

It is time that here nachbessert Kangertech urgently.
Anyway, they have a customer less ...