The holder is fit for Galaxy S 3, the unit will lock into place and remove easily. The device holder and the gooseneck can be from each other but no longer separate, once they are engaged with the necessary and audible click with each other. In fact, the device sits while driving so far free of vibration and firmly in the holder, and the suction cup holds well on the disc (see how the detachment then goes and let's see how temperature changes affect the disc in the summer time). But the charging cable is total crap, clearly too short (about 45 cm from the plug "coiled" condition, max. At twice the length extendable, but then under high voltage). I have attached the bracket already as close as possible to the windscreen in relation to the cigarette lighter, but the tension of the cable is simply too high (car is a Peugeout 307 cc). I'm afraid to damage my port on phone, especially since the USB connector is also provided with a type of two small barbs, presumably from slipping out due to the high voltage to vermeiden.Im compared to the original current landline connector Samsung acts of USB Probes also sharp-edged and somehow not really fit, which manifests itself during insertion and removal also noticeable: when plugging you really need but absolutely straight goals, otherwise it hakelt, a constant fumbling, when pulling out significantly more force has to be applied as the mains plug. I hope I find commercially a original cable of Samsung, which is also significantly longer, because in navigating the battery does not last long and the device must be easy times to be powered.