The instructions are simple and understandable. Very good I liked that the individual parts are covered with letters, so that any confusion is virtually excluded. Therefore, the assembly is very simple.
However, the manufacturing quality of the individual boards is a disaster. On the one hand are the holes for the wooden pegs that are intended to stabilize the whole thing, so large that the whole construction is shaking like crazy and the other hand the gap dimensions are very poor and the overall fit is poor.
I strongly recommend to secure the much too small wooden pins with glue to give it some stability.
The fit of the rear walls is flawed - as you also aligns this, there is always somewhere about. The firm cut the nails is due to the thin woods quickly an ordeal, since one gets quickly the veneer broken when a nail goes in minimally wrong.
The shelves outside the left and the far right had to be brought into their positions by force, since the gap due to the unclean Production lengths was not wide enough. In this action, the veneer is then directly times outside torn.
My copy was still covered with scratches. Paint damage on the boards were simply painted over factory very unclean with white paint. Due to the very imprecise manufacturing as described above individual boards are facing forward, which does not look nice.
Something positive there would nonetheless be - built once the shoe closet looks quite nice (unless you hinguckt up close) and the stability is more than sufficient, at least with glued pins, so that I can sit with my 90 kilos it without the somewhat unstable or yielding.
The seat cushion (which was incidentally based very wrong) to be provided with Velcro, so you can attach it to the top, I think of a successful idea.
Normal shoes in size 44 fit into it properly.
Bottom line, although a nice part, but for the quality too expensive.
